Reliable quality

Technical features of PLASTFOIL

Linear dimensions of sheet in roll and limit deviations from nominal dimensions

Index Nominal dimensions
Thickness, mm 1,2; 1,5; 2,0
Width, mm 1,500; 2,000; 2,100
Length, mm 20,000; 25,000

*Note — It is possible, with the agreement of the Customer, to manufacture PLASTFOIL® material on other sizes by length and width. It is possible to supply PLASTFOIL® material with 3.0 mm thickness.

Physical and mechanical properties

Indices Material index value
Material grade
PLASTFOIL® F
PLASTFOIL® F NORD
PLASTFOIL® S PLASTFOIL® U
Reinforcement type
polyester net without reinforcement
1. Appearance
Material sheet should not have cracks, holes, breaches and folds. Material should be tightly reeled in rolls and should not stick together. Rolls should have straight butt ends.
2. Conditional strength,
MPa, not less than
  • at thickness 1.2 mm
  • at thickness 1.5 mm
  • at thickness 2.0 mm
14,0
13.0
-
-
12.0
-
-
-
17.0
3. Length at rupture, %, not less than
  • at thickness 1.2 mm
  • at thickness 1.5 mm
  • при толщине 2,0 мм


120
140
-


-
300
-


-
-
300
4. Flexibility upon beam with curvature radius of 5 mm, at temperature of °С
-35/-55 -35 -35
5. Watertightness at pressure not less than 0.001 MPa during not less than 72 hours and not less than 0.2 MPa during not less than 2 hours
watertight
6. Resistance to static piercing at (250+10) N for (24+0.2) hours
watertight
7. Change of linear dimensions at heating, %, not more than
0,5 2,0 1,5
8. Water absorption,%, by weight, not more than
0,2
9. Shore hardness А. arb/un., not less than
78

Fire hazard indices

Material grade Combustibility group by GOST 30244 Inflammability group by GOST 30402 Flame spread group by GOST 30444 (GOST R 51032)
PLASTFOIL® F,
PLASTFOIL® F NORD 1.2 and 1.5 mm thick
Г1 В2 РП1
PLASTFOIL® S
PLASTFOIL® U
Г4 В3 РП4